|
Q: Can you give me per bay pricing so I can consider a car
wash facility as an investment?
A: Please feel free to give us a call on (03) 8340 3200 or
contact us via
email to further discuss your ideas on establishing a car
wash. We can provide you with pricing figures to assist you
in making an informed decision.
Q: Will Prowash service the equipment and how often should it
be serviced?
A: Prowash have a dedicated service team that prides itself on
giving the best possible service and support in the industry.
We travel Australia wide to service the equipment we have supplied
and installed, to ensure everything is operating at its optimum.
Apart from daily, weekly and monthly maintenance you can carry out
yourself, we recommend preventative maintenance is carried out by
the Prowash service team every 6 months. The frequency of
this maintenance may alter depending on how busy your site
is. If you have a Laserwash® Touchfree Automatic on
your site, this may also require more frequent servicing.
Q: Does the equipment come with a warranty?
A: Yes, the equipment does come with a warranty. Once we have
received a deposit for the purchase of your equipment, you will be
issued with a Purchase Agreement document that will further outline
the warranty conditions.
Q: What are the advantages of a Prowash Self Serve car
wash?
A: The advantages are as follows:
- 3/8” low-pressure poly tubing increases flow rates into the car
wash bay
- Incorporates all-stainless steel pre-plumbed hot and cold water
manifolds
- A pulsation dampener on each high-pressure pump reduces water
hammer
- Dual in-bay Z Booms reduce hose tangling
- Low-voltage circuit’s are protected by resettable circuit
breaker’s
- Stainless steel check valves increase durability
- Low-pressure clearcoat protectant and hot high-pressure wax
sealant are standard
- Australian Microcoin coin acceptors are fitted to all
equipment, including fragrance machines, vacuums and electronic
vendors
- One main isolating switch allows complete shut down for
emergency situations
- A low water-pressure cut off protects pumps from running dry
(it pauses the customer’s time in the wash bay and resumes once
pressure is restored)
- Incorporates three phase power loss protection
- A built-in time clock controls equipment operating hours if
required
- Individual stainless chemical tanks feature a non-drip lid
- Each wash bay features Start and Stop override switches
- Incorporates mains-pressure hot and cold water feed to high
pressure pumps
- Back-pressure relief valves are fitted on all low-pressure
hoses from the equipment to the wash bay.
|
